3Peak Incorporated TPV809
The TPV809 and TPV810 have push-pull outputs, whereas the TPV803 has an opendrain output, which requires an external pull-up resistor. The TPV803/809/810 is available in SOT23-3 and SOT23G-3 packages and typically consumes only 2.2 μA, suitable for use in low-power, portable applications.| Part No. | TPV809 |
|---|---|
| Datasheet | TPV809 Download |
| Manufacturer |  3Peak Incorporated |
| Description | Low-Voltage Supervisory |
| Buy | Stock & Price |
FEATURES
DESCRIPTION
● Precision Low Voltage Monitoring● 200 ms (Typical) Reset Timeout
● Open-drain Active-low Output (TPV803)
● Push-pull Active-low Output (TPV809)
● Push-pull Active-high Output (TPV810)
● Low Power Consumption: 2.2 μA
● Guaranteed Reset Output valid to VCC = 1 V
● Power Supply Glitch Immunity
● Specified from −40°C to +125°C
● SOT23-3 and SOT23G-3 Packages
APPLICATIONS
The TPV803/809/810 is a series of supervisory circuit that monitors power supply voltage levels and provides a power-on reset signal. They provide a reset output during power-up, power-down, and brownout conditions. The reset timeout periods are fixed at 200 ms (typical). The TPV803 and TPV809 provide an active low reset signal (RESET), whereas the TPV810 provides an active high signal (RESET) output.● Microprocessor Systems
● Computers
● Controllers
● Intelligent Instruments
● Portable Equipment Typical Application Circuit LDO IN OUT TPV8xx VCC RESET GND VCC RPU FPGA, ASIC, DSP, MCU RESET GND 1 / 18 GA20240201A11 TPV803/TPV809/TPV810 Low-Voltage Supervisory Circuit Table of Contents
FEATURES
......................................................
