LMV321TP Datasheet | 3PEAK

Features - Stable 1.27 MHz GBWP with Low IQ of Only 40 μA Typical per Amplifier - 0.9 V/μs Slew Rate - Offset Voltage: 3.5 m V Maximum - Offset Voltage Temperature Drift: 0.6 μV/°C - Input Bias Current: 1 p A Typical - Beyond the Rails Input mon-Mode Range - Outputs Swing to within 5 m V Typical of each Rail - No Phase Reversal for Overdriven Inputs - Single +2.1 V to +6.0 V Supply Voltage Range - - 40°C to 125°C Operation Range Applications - Active Filters, ASIC Input or Output Amplifier - Sensor Interface - Smoke/Gas/Environment Sensors - Portable Instruments and Mobile Device - Audio Output - Battery or Solar Powered Systems - Medical Equipment - Piezo Electrical Transducer Amplifier Description LMV321TP/358TP/324TP are CMOS single, dual, and quad op-amps with low offset, stable highfrequency response, low power, low supply voltage, and rail-to-rail inputs and outputs. They incorporate 3PEAK’s proprietary and patented design techniques to achieve best in-class performance e among all micro-power CMOS amplifiers. The LMV321TP/358TP/324TP is unity-gain stable under Any Capacitive Load with 1.27 MHz gainbandwidth product, 0.9 V/μs slew rate while consuming only 40 μA of supply current per amplifier. Beyond the rails input and rail-to-rail output characteristics allow the full power-supply voltage to be used for signal range. This bination of features makes the LMV321TP /358TP/324TP superior among rail-to-rail input /output CMOS op-amps in its power class. The LMV321TP/358TP/324TP family is an ideal choice for battery-powered applications because they minimize errors due to power supply voltage variations over the lifetime of the battery and maintain high CMRR even for a rail-to-rail input op-amp. Typical Application Circuit .3peakic..cn 1 / 28 Rev.A.4 LMV321TP/LMV358TP/LMV324TP 40-μA, 1.27-MHz, Micro-Power Rail-to-Rail I/O Op Amps Table of Contents Features...