Datasheet Details
| Part number | TP2431 |
|---|---|
| Manufacturer | 3Peak |
| File Size | 690.78 KB |
| Description | 1.6MHz Bandwidth Micropower Low Noise Op-amps |
| Datasheet | TP2431-3Peak.pdf |
|
|
Overview: 3PEAK TP2431/TP2432 /TP2434 1.6MHz Bandwidth, Micropower Low Noise.
| Part number | TP2431 |
|---|---|
| Manufacturer | 3Peak |
| File Size | 690.78 KB |
| Description | 1.6MHz Bandwidth Micropower Low Noise Op-amps |
| Datasheet | TP2431-3Peak.pdf |
|
|
|
◼ Low Noise: 13nV/√Hz(f= 1kHz) ◼ Supply Current: 190μA/ch ◼ Offset Voltage: 1 mV (max) ◼ Low THD+N: 0.0005% ◼ Supply Range: 2.2V to 5.5V ◼ Low Input Bias Current: 0.3pA Typical ◼ EMIRR IN+: 85 dB( under 2.4GHz) ◼ Slew Rate: 0.9 V/μs ◼ Gain-bandwidth Product: 1.6MHz ◼ Rail-to-Rail I/O ◼ High Output Current: 70mA (1.0V Drop) ◼ –40°C to 125°C Operation Range Applications ⚫ Portable Equipment ⚫ Battery-Powered Instruments ⚫ Data Acquisition and Control ⚫ Low-Voltage Signal Conditioning ⚫ munications ⚫ Security The single TP2431, dual TP2432, and quad TP2434 operational amplifiers bine excellent DC accuracy with Rail-to-Rail operation at the input and output.
Since the mon-mode voltage extends from VCC to VEE, the devices can operate from either a single supply (2.2V to 5.5V) or split supplies (±1.1V to ±2.75V).
Each op amp requires less than 190μA of supply current.
| Part Number | Description |
|---|---|
| TP2432 | 1.6MHz Bandwidth Micropower Low Noise Op-amps |
| TP2434 | 1.6MHz Bandwidth Micropower Low Noise Op-amps |
| TP2401 | Low Noise CMOS Op-amps |
| TP2402 | Low Noise CMOS Op-amps |
| TP2404 | Low Noise CMOS Op-amps |
| TP2411 | Low Noise CMOS RRIO Op-amps |
| TP2412 | Low Noise CMOS RRIO Op-amps |
| TP2414 | Low Noise CMOS RRIO Op-amps |
| TP2011 | Push-Pull Output Comparators |
| TP2012 | Push-Pull Output Comparators |