TP6002 Datasheet | 3PEAK

Features - Supply Voltage: 2.1 V to 6.0 V - Low Supply Current: 80 μA per channel - Rail to Rail Input and Output - Bandwidth: 1 MHz - Slew Rate: 0.7 V/μs - Excellent EMI Suppress Performance - Offset Voltage: ±3 m V Maximum - Offset Voltage Temperature Drift: 2 μV/°C - Low Noise: 27 n V/√Hz at 1 k Hz - High Output Capability: 100 m A - - 40°C to 125°C Operation Temperature Range Applications - Active Filters, ASIC Input or Output Amplifier - Sensor Interface - Smoke/Gas/Environment Sensors - Portable Instruments and Mobile Device Description The TP600X series are CMOS single, dual, quad opamps with RRIO, low offset, low power and stable high-frequency response. They incorporate 3PEAK’s proprietary and patented design techniques to achieve excellent AC performance with 1 MHz bandwidth, 0.7 V/μs slew rate, and low distortion while drawing only 80 μA of quiescent current per amplifier. The mon-mode input voltage range extends 100 m V beyond V- and V+, and the outputs swing rail-to-rail. The TP600X family can be used as plug-in replacements for many mercially available op-amps to reduce power and improve the input/output range and performance. The bination of features makes the TP600X an ideal choice for motor control and portable audio amplification, sound ports, and other consumer Audio. The TP600X Op-amp is very stable, and it is capable of driving heavy capacitive loads such as those found in LCDs. The ability to swing rail-to-rail at the inputs and outputs enables designers to buffer CMOS DACs, ASICs, or other wide output swing devices in singlesupply systems. Typical Application Circuit .3peak. 1 / 20 Rev.A.0 TP6001/TP6002/TP6004 1 MHz, 80 μA, RRIO, Op Amps Table of Contents Features 1 Applications...