TAI8555 Datasheet | AAG

.. 1-Wire® Switch Tecnoogía Aplicada Tecnología Aplicada a la Información Features - - - - - - - - - - - 1-Wire® controlled latched Relay. NO and NC Relay outputs @ 1 amp. 0V-12V feedback input. No extra power supply required. Dallas Semiconductors DS2406 based. Pass through 1-Wire® network connection. Available option with Dallas Semiconductors TAG-ID standard for electronic identification of function. Simple interconnect through RJ11 connectors. Available with optional DS18S20 temperature sensor. HF input protection protection with ferrite beads Unique 1-Wire address permits multiple sensors on network Description The 1-Wire Switch module allows control of resistive loads up to 1 amp. Its unique address permits it to be individualy identified, selected and controlled within a 1-Wire network. In addition to the relay output the module has a separate input that can be used as an independent input or as a feedback input for the controlled device. . The 0V to 12V input range of this input is protected by a series diode. The connect to the controlled relay is via wire conectors. Optionally, the device can include a DS18S20 or a DS2505 EPROM memory in which the parameters of the module are stored using the TAG-ID and TAG-XML specification By choosing TB or TS versions, a DS18X20 temperature is included in the module. A DS18B20 for the TB option and a DS18S20 in case of the TS version respectively. For further information regarding the DS2406 or the TAG-ID standard, visit: .ibutton. or .dalsemi. Automatización Aplicada a Gasolineras S.A. de C.V.., Pino Suárez #271G, Col.Niños Héroes Querétaro, 76010, Querétaro Tel/Fax +52(442)215-3166 e-mail:info@infoaag..mx, .aag..mx 1 Rev.110402 .. 1-Wire® Switch Tecnología Aplicada a la Información Specifications - TQ2E-L2-5V relay 1 amp @ 30V max or 125 VCA max. resistive load - Recovery time 1 sec - Input status reported trought DS2706 VCC Pin...