The AAT3141 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications.
Key Features
ChargePump™
VIN Range: 2.7V to 5.5V Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum Efficiency and VF Coverage Drives Low-VF and High-VF Type LEDs Up to Four 30mA Outputs AS2Cwire Independent 3+1 Output Addressing 32-Position Logarithmic Scale with Digital Control Low Noise Constant Frequency Operation 1MHz Switching Frequency AutoBias Technolo.
Full PDF Text Transcription for AAT3141 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AAT3141. For precise diagrams, and layout, please refer to the original PDF.
AAT3141 High Efficiency 1X/1.5X/2X Charge Pump for White LED Applications General Description The AAT3141 is a low noise, constant frequency charge pump DC/DC converter t...
View more extracted text
T3141 is a low noise, constant frequency charge pump DC/DC converter that uses a tri-mode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The device produces current levels up to 30mA on each of its four current source outputs to drive various arrangements of LEDs from a 2.7V to 5.5V input. Outputs may be operated individually or in parallel for driving higher-current LEDs. A low external parts count (two 1µF flying capacitors and two small 1µF capacitors at VIN and CP) make the AAT3141 ideally suited for small battery-powered applications.
AAT3141 Datasheet
