The AAT3143 is a low noise, constant frequency charge pump DC/DC converter that uses a trimode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications.
Key Features
ChargePump™
Input Voltage Range: 2.7V to 5.5V PWM Brightness Control Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum Efficiency and VF Coverage Drives Four Low- or High-VF Type LEDs Up to 20mA LED Current per Channel No Inductors 1MHz Switching Frequency Small.
Full PDF Text Transcription for AAT3143 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AAT3143. For precise diagrams, and layout, please refer to the original PDF.
High Efficiency 1X/1.5X/2X Charge Pump with PWM Control for White LED Applications General Description The AAT3143 is a low noise, constant frequency charge pump DC/DC co...
View more extracted text
on The AAT3143 is a low noise, constant frequency charge pump DC/DC converter that uses a trimode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AAT3143 can deliver current levels up to 80mA to drive white LEDs connected to the four current source outputs from a 2.7V to 5.5V input. The current source outputs may source up to 20mA each and may be operated individually or in parallel for driving higher-current LEDs. A low external parts count (two 1µF flying capacitors and two small 1µF capacitors at VIN and VOUT) makes the AAT3143 ideally suited for s
AAT3143 Datasheet
