The AAT3157 is a low noise, constant frequency charge pump DC/DC converter that uses a trimode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications.
Key Features
ChargePump™
VIN Range: 2.7V to 5.5V Fully Programmable Current with Single Wire.
16 Current Levels.
Four Low Current Settings Down to 50µA Low IQ (50µA) for Low Current Mode Tri-Mode 1X, 1.5X, and 2X Charge Pump for Maximum Efficiency and VF Coverage Drives up to Three Channels of LEDs No Inductors, Low Noise Operation 1MHz Constant Switching Frequency Small.
Full PDF Text Transcription for AAT3157 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
AAT3157. For precise diagrams, and layout, please refer to the original PDF.
www.DataSheet4U.com High Efficiency 1X/1.5X/2X Charge Pump For White LED Applications General Description The AAT3157 is a low noise, constant frequency charge pump DC/DC...
View more extracted text
ption The AAT3157 is a low noise, constant frequency charge pump DC/DC converter that uses a trimode load switch (1X), fractional (1.5X), and doubling (2X) conversion to maximize efficiency for white LED applications. The AAT3157 is capable of driving up to three channels of LEDs at 20mA per channel from a 2.7V to 5.5V input. The current sinks may be operated individually or in parallel for driving higher current LEDs. A low external parts count (two 1μF flying capacitors and two small 1μF capacitors at IN and OUTCP) make this part ideally suited for small, battery-powered applications.
AAT3157 Datasheet
