Datasheet4U Logo Datasheet4U.com

AAT3194 - High Efficiency 1.5X Fractional Charge Pump

General Description

The AAT3194 is a low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white LED applications.

The devices can be used to produce current levels up to 20mA for each output from a 2.7V to 5.5V input.

Key Features

  • ChargePump™ VIN Range: 2.7V to 5.5V 20mA Full-Scale Current Simple Serial Control (S2Cwire) Interface.
  • 32-Position Logarithmic Scale with Digital Control Low Noise Constant Frequency Operation 33% Less Input Current Than Doubler Charge Pump High Accuracy Brightness Matching Small.

📥 Download Datasheet

Datasheet Details

Part number AAT3194
Manufacturer AAT
File Size 334.54 KB
Description High Efficiency 1.5X Fractional Charge Pump
Datasheet download datasheet AAT3194 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AAT3194 High Efficiency 1.5X Fractional Charge Pump Skyworks
AAT3190 Positive/Negative Charge Pump for Voltage Bias ANALOGICTECH
AAT3193 Three-Channel Charge Pump LED Driver Skyworks
AAT3195 Four-Channel Charge Pump LED Driver Skyworks
AAT3103 3-Channel Charge-Pump LED Driver Advanced Analog Technology

Other Datasheets by AAT

Part Number Description
AAT3192 (AAT3192 / AAT3193) 2-/3-Channel Charge-Pump LED Drivers
AAT3193 (AAT3192 / AAT3193) 2-/3-Channel Charge-Pump LED Drivers
AAT3195 4-Channel Charge-Pump LED Driver
AAT3112 High Efficiency Charge Pump
AAT3114 High Efficiency 1.5X Fractional Charge Pumps

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
High Efficiency 1.5X Fractional Charge Pump For White LED Applications General Description The AAT3194 is a low noise, constant frequency charge pump DC/DC converters that use fractional (1.5X) conversion to increase efficiency in white LED applications. The devices can be used to produce current levels up to 20mA for each output from a 2.7V to 5.5V input. A low external parts count (two 1µF flying capacitors and two small bypass capacitors at IN and OUT) makes these devices ideally suited for small, battery-powered applications. AnalogicTech’s Simple Serial Control™ (S2Cwire™) interface is used to enable, disable, and set the LED drive current for 32-level logarithmic scale LED brightness control.