SSCE5V031SB
SSCE5V031SB is Ultra Low Capacitance Array manufactured by AFSEMI.
Description
- PIN configuration
The SSCE5V031SB is a high performance and low cost design which includes surge rated diode arrays to protect high speed data interfaces. The SSCE5V031SB family has been specifically designed to protected sensitive ponents. Which are connected to data and transmission lines, from over-voltage caused by Electrostatic Discharging(ESD). Electrical Fast Transients(EFT),and lightning.
The SSCE5V031SB is a unique design which includes surge rated, low capacitance steering diodes and a unique design of clamping cell which is an equivalent TVS diodes in a single package. During transient conditions, the steering diodes direct the transient to either the power supply line or to the ground line. The internal unique design of clamping cell prevents over-voltage on the power line, protecting any downstream ponents. The SSCE5V031SB may be used to meet the ESD immunity requirements of IEC 61000-4-2, level 4( ±15KV air, ±8KV contact discharge).
- Feature
- ESD Protect for 4 high-speed I/O channels
- Provide ESD Protection for each channel to
IEC 61000-4-2（ESD) ±15KV(air), ±15KV(contact) IEC 61000-4-4(EFT) (5/50ns) 40A IEC 61000-4-5(Lightning) (8/20us) 5.5A
- For low operating voltage applications:5V
- Low capacitance:1.0p F typical
- Fast turn-on and low clamping voltage
- Array of surge rated diodes with internal equivalent TVS diode
- Small package saves board space
- Solid-state silicon-avalanche and active circuit triggering technology
Topview
- Applications
- Video Graphics Cards
- USB2.0 Power and Data lines protection
- Notebook and PC puters
- Monitors and Flat Panel Displays
- IEEE 1394 Firewire Ports
- SIM Ports
- Machanical data
- Lead finish:100% matte Sn(Tin)
- Mounting position: Any
- Qualified max reflow temperature:260℃
- Device meets MSL 1 requirements
- Pure tin plating: 7 ~ 17 um
- Pin flatness:≤3mil
SSC-V1.0
.afsemi.
1/7
Analog Future
- Electronic...
