AM10E Datasheet | AIMTEC

DESCRIPTION Our AM10E series is a family of cost effective 10W single and dual output DC/DC converters. These converters bine nickel-coated copper package with high performance features such as 1500VDC input/output isolation voltage, continuous short circuit protection with automatic restart and tight line / load regulation. Wide range devices operate over 2:1 input voltage range providing stable output voltage. Input voltages of 12, 24 and 48VDC with output voltages of 3.3, 5, 7.2, 9, 12, 15, 18, 24, ±3.3, ±5, ±7.2, ±9, ±12, ±15, ±18 or ±24VDC. High performance features include high efficiency operation up to 90% and output voltage accuracy of ±1% maximum. All models are packaged in a low profile 50.8 x 25.4 x 10.16mm nickel-coated copper case. Operation is specified over the full operating temperature range of 40°C to +85°C with no derating required. Cooling is by free-air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Voltage range 12VDC, 9~18VDC 24VDC, 18~36VDC 48VDC, 36~72VDC Capacitor General Specifications: Efficiency Switching frequency Output Specifications: Voltage accuracy Voltage balance (Dual Output) Ripple and noise (at 20MHz BW) Short circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient Over load protection Physical Specifications: Dimensions Weight Case material 83% to 90% 200KHz, typ. 100% load ±1%, max. ±1% ±100m Vp-p, max. Continuous Automatic ±0.5%, max. ±0.5%, max. ±0.02%/°C, typ. 130%, typ. 100% load 50.8x25.4x10.16mm 2.00x1.00x0.40inches 46g Nickel-Coated Copper Filter Isolation Specifications: Rated voltage (60 sec) Resistance Capacitance 1500VDC > 1000MOhm 500p F, typ. Environmental Specifications: Operating temperature (ambient) -40°C ... +85°C Storage temperature -40°C ... +125°C Case Temperature +100°C, max. Derating None required Humidity...