AM10EW-C Datasheet | AIMTEC

DESCRIPTION Our AM10EW-C series is a family of cost effective 10W single output DC-DC converters. These converters are shielded on all six sides and encapsulated with a nickel-coated copper with a non-conductive base and dimensions of 50.8x25.4x10.5mm. The high performance features of our AM10EW-C ponents include short circuit protection with current limit auto recovery, tight line regulation and a high efficiency operation coefficient up to 83%. These wide range devices operate over 4:1 input voltage range, providing a continuously stable output voltage. Ten models operate from an input voltage range of 24 & 48VDC producing output voltages of 3,3, 5, 12, 15 & 24VDC. The normal operation is specified over the full operating temperature range of -25°C to +71°C with no derating required. Cooling is done by free air convection. ELECTRICAL SPECIFICATIONS All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated. Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage Resistance Capacitance General Specifications: Efficiency Switching frequency Output Specifications: Voltage accuracy Ripple Noise Short circuit protection Over current protection 24VDC, 9~36VDC 48 VDC, 18~75VDC p (Pi) Network 1500VDC >1000 Mohms 1000p F 78% to 83% 300KHz, typ. 100% load ±2%, max. <0.2% Vout +20m Vmax (Vp-p) <0.5% Vout +50m Vmax (Vp-p) Current limit, auto-recovery Works over 120% of rating and recovers automatically Over voltage protection Zener diode clamp protection Line regulation (HL-LL) ±0.5%, typ. Load regulation (10-100%) ±1%, typ. Temperature coefficient ±0.02%/°C, typ. Physical Specifications: Dimensions 50.8x25.4x10.5mm 2.0x1.0x0.413inches Weight 32g Case material Nickel-Coated Copper with Non-Conductive base, six sides’ shielded Environmental Specifications: Operating temperature -25°C …+71°C Storage temperature -55°C …+105°C Case temperature +95°C, max. Humidity (non-condensing) Up to 95%...