AM1D-2412D-N Datasheet | AIMTEC

.. AM1D-N Series 1 watt dc-dc converters - - - - 7PIN SIP PACKAGE LOW RIPPLE & NOISE HIGH EFFICIENCY UP TO 81% UL94-VO PACKAGE - - - INPUT/OUTPUT ISOLATION: 1000, 3000 & 6000VDC OPERATING TEMPERATURE: -40°C ... +85°C PIN-PATIBLE WITH MULTIPLE MANUFACTURERS Our AM1D-N series is a family of cost effective 1W single, dual output isolated DC-DC converters. These converters achieve low cost and ultra-miniature SIP7 pin size without promising performance and reliability. Seventy two models operate from input voltages of 5, 12 & 24VDC; producing output voltage levels of 5, 9, 12, 15, ±5, ±9, ±12, ±15VDC. Full SMD-design and a 100% production test of parameters ensures a high reliability in this product. ELECTRICAL SPECIFICATIONS Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage (60 sec) Resistance Capacitance ±10% Capacitor 1000, 3000 & 6000VDC > 1000MOhm 60p F, typ. General Specifications: Efficiency Switching frequency 72% to 81% 150KHz, typ. 100% load Output Specifications: Voltage balance (dual output) ±1% Voltage accuracy ±5%, max. Ripple & noise (at 20MHz BW) 75m Vp-p, typ. Short circuit protection 1 sec. Line voltage regulation ±1.2% / 1.0% of Vin Load voltage regulation 10% max. load=10~100% Temperature coefficient ±0.03%/°C, max. Specifications are subject to change without notification Environmental Specifications: Operating temperature (ambient) -40°C ... +85°C Storage temperature -55°C ... +125°C Case Temperature +95°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection Physical Specifications: Dimensions (1000 & 3000VDC) 19.50x6.00x10.00mm 0.76x0.24x0.39inches Dimensions (6000VDC) 19.50x9.8x12.5mm 0.76x0.39x0.49inches Weight 2g Case material Plastic UL94-VO MTBF: > 1,100,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C) PIN CONNECTIONS Pin Single 1000VDC...