AM1S
AM1S is 1 watt dc-dc converters manufactured by AIMTEC.
DESCRIPTION
Our AM1S series is a family of cost effective 1W single output isolated DC/DC converters. These converters achieve low cost and ultra-miniature SIP4 pin size without promising performance and reliability. Forty eight models operate from input voltage 5, 12 & 24VDC; producing output voltage levels of 3.3, 5, 7.2, 9, 12, 15, 18, 24VDC. Full SMD-design and a 100 % production test of parameters ensures a high reliability in this product.
ELECTRICAL SPECIFICATIONS
Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified. Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage (60 sec) Resistance Capacitance Output Specifications: Voltage accuracy Ripple & noise (at 20MHz BW) Short circuit protection Line voltage regulation Load voltage regulation Temperature coefficient ±10% Capacitor General Specifications: Efficiency Switching frequency 71% to 80% 80KHz, typ. 100% load
1000VDC 3000VDC > 1000MOhm 60p F, typ.
Environmental Specifications: Operating temperature (ambient) -40°C ... +85°C Storage temperature -55°C ... +125°C Case Temperature +90°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection Physical Specifications: Dimensions Weight Case material 11.68x6.00x10.15mm 0.46x0.24x0.40inches 1.8g Non-conductive black plastic
±5%, max. 100m Vp-p, max. Momentary ±1.2% / 1.0% of Vin ±8%, load=20~100% ±0.02%/°C, typ.
MTBF: > 1,191,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C)
Specifications are subject to change without notification
OUTLINE DIMENSIONS & PIN CONNECTIONS
Pin 1 2 3 4 1000 & 3000VDC Single -V Input +V Input -V Output +V Output
Continued on next page
VISIT US AT .AIMTEC.CA
Data Sheet 4 U .
DC-DC CONVERTERS
..
AM1S Series
MODELS
Single output Models Isolation 1000VDC AM1S-0503S AM1S-0505S AM1S-0507S AM1S-0509S AM1S-0512S AM1S-0515S AM1S-0518S AM1S-0524S AM1S-1203S AM1S-1205S AM1S-1207S AM1S-1209S AM1S-1212S AM1S-1215S...
