AM2F Datasheet | AIMTEC

features such as 1000VDC, 3000VDC & 5200VDC input/output isolation voltage, continuous short circuit protection with automatic restart and tight line / load regulation. Input voltages of 5, 12 & 24VDC with producing output voltage levels of 3.3, 5, 7.2, 9, 12, 15, 18, 24VDC. High performance features include high efficiency operation up to 68% and output voltage accuracy of ±2% maximum. Standard features include an input range of ±10% tolerance and low output noise and ripple. All models are package in a low profile 31.80x8.60x13.47mm 12 pin SIP nonconductive black plastic case. Operation is specified over the full operating temperature range of -25°C to +71°C with no derating required. Cooling is by free-air convection. ELECTRICAL SPECIFICATIONS Specifications typical at +25°C, nominal input voltage, rated output current unless otherwise specified Input Specifications: Voltage range Filter Isolation Specifications: Rated voltage (60 sec) Resistance Capacitance Output Specifications: Voltage accuracy Ripple & noise (at 20MHz BW) Short circuit protection Short circuit restart Line voltage regulation Load voltage regulation Temperature coefficient ±10% p (Pi) Network General Specifications: Efficiency Switching frequency 64% to 68% 125KHz, typ. 100% load 1000, 3000 & 5200VDC > 1000MOhm 60p F, typ. ±2%, max. 75m Vp-p, max. Continuous Automatic ±0.5%, max. ±0.5%, max. ±0.02%/°C, typ. Environmental Specifications: Operating temperature (ambient) -25°C ... +71°C Storage temperature -40°C ... +125°C Case temperature +90°C, max. Derating None required Humidity (non-condensing) Up to 90% Cooling Free-air Convection Physical Specifications: Dimensions Weight Case material 31.80x8.60x13.47mm 1.25x0.34x0.53inches 10.7g Non-conductive black plastic MTBF: > 1,024,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C) Specifications are subject to change without notification Pin 1000, 3000 & 5200VDC Single OUTLINE DIMENSIONS & PIN CONNECTIONS 1 2 3 9 10 11 12 +V Input N.C. N.C....