AM5TW Datasheet | AIMTEC

features such as 1500VDC & 3500VDC input/output isolation voltage, continuous short circuit protection with automatic restart and tight line / load regulation. Wide range devices operate over 4:1 input voltage range providing stable output voltage. Devices are encapsulated using flame retardant resin. Input voltages of 24 & 48VDC with output voltages of 3.3, 5, 7.2, 9, 12, 15, 18, 24, ±3.3, ±5, ±7.2, ±9, ±12, ±15, ±18 & ±24VDC. High performance features include high efficiency operation up to 80% and output voltage accuracy of ±1% maximum. All models are packaged in a low profile 31.75x20.32x10.16mm 24 pin DIP nickel-coated copper case. Operation is specified over the full operating temperature range of -40°C to +85°C with no derating required. Cooling is by free-air convection. ELECTRICAL SPECIFICATIONS Specifications typical at +25°C, normal input voltage, rated output current unless otherwise specified. Output Specifications: Input Specifications: Voltage range 24VDC, 9~36VDC Voltage accuracy ±1% max. 48VDC, 18~72VDC Voltage balance (Dual Output) ±1% Filter p (Pi)Network Ripple & Noise (at 20MHz BW) 60m Vp-p, max. Short circuit protection Continuous Isolation Specifications: Short circuit restart Automatic Rated voltage 1500 & 3500VDC Line voltage regulation ±0.5%, max. Resistance > 1000MOhm Load voltage regulation ±0.5%, max. Capacitance 80p F, typ. Temperature Coefficient ±0.2% /°C, typ. General Specifications: Environmental Specifications: Efficiency 74% to 80% Switching Frequency 250KHz, typ. 100% load Operating temperature (ambient) -40°C ... +85°C Storage temperature -55°C ... +125°C Physical Specifications: Case temperature +100°C, max. Dimensions 31.75x20.32x10.16mm Derating None required 1.25x0.8x0.4 inches Humidity (non-condensing) Up to 90% Weight 26g Cooling Free-air Convection Case material Nickel-Coated Copper MTBF: > 1,112,000 hrs (MIL-HDBK-217F, Ground Benign, t=+25°C) Pin 1500VDC Single Dual 3500VDC Single Dual Specifications are subject to...