Datasheet4U Logo Datasheet4U.com

AP1014AEC Datasheet Dual H-bridge Motor Driver

Manufacturer: AKM (Asahi Kasei Microdevices)

Overview: [AP1014AEC] AP1014AEC 7.0V Dual H-Bridge Motor Driver IC 1. Genaral.

General Description

The AP1014AEC has four drive mode of forward, reverse, brake and standby by 2 channel H-bridge Motor Driver corresponding to operating voltage 7.0V.

It is possible to set to the input logic which was suitable for the PWM drive with the SEL terminal.

The AP1014AEC layout N-ch LDMOS FET in high side and low side in output circuit and realize a small WL-CSP package.

Key Features

  • Control Supply Voltage 2.7V to 5.5V.
  • Wide Motor Drive Operating Voltage 2.0V to 7.0V.
  • Maximum Output Current (DC) 1.1A @Ta=25C, 0.8A @Ta=85C.
  • Maximum Output Current (Peak) 2.0A (Ta=25C, 10ms/200ms).
  • H-Bridge ON Resistance RON (TOP+BOT)=0.35Ω @Ta=25C.
  • Built-in Under Voltage Detection Circuit Detect VC Supply Voltage under 2.2V.
  • Built-in Thermal Shut Down Circuit (Tj) 175C.
  • Junction Temperature 150C.
  • Package 16-pin WL-CSP (1.96mm×.

More Datasheets from AKM (Asahi Kasei Microdevices)

Part Number Description
AP1010 H-Bridge Motor Driver
AP1015BEN H-Bridge Motor Driver
AP1016AEN Dual H-Bridge Motor Driver
AP1017 12V 1ch H-Bridge Motor driver
AP1018 Dual H-Bridge Motor Driver
AP1019 Dual H-Bridge Motor Driver
AP1021AEN Dual Microstepping Motor Driver
AP1023 H-Bridge Constant Voltage Control Motor Driver
AP1025BEN Single Stepper Motor Driver
AP1029ADN H-Bridge DC Motor Driver

AP1014AEC Distributor