AMI SEMICONDUCTOR AMIS-710214
The AMIS-710214 (PI214MC-DR) is a contact image sensor (CIS) module with an additional on-board circuit that digitizes the analog pixels from the CIS image sensor to a “background-tracking”, two-level digital output signal. It is based on AMI Semiconductor’s CIS module that employs MOS image sensor technology to gain its high-speed performance and high sensitivity. The AMIS-710214 is suitable for scanning documents with width of 216mm and with resolution of 8 dots per millimeter (dpm).| Part No. | AMIS-710214 |
|---|---|
| Datasheet | AMIS-710214 Download |
| Manufacturer |  AMI SEMICONDUCTOR |
| Description | 200dpi Two Level Digital Output Module |
| Buy | Stock & Price |
GENERAL DESCRIPTION
It has broad applications, but is specially designed for the following areas:● Where data compression is required, such as in data transmissions.
● Where component pin-out count must be kept to a minimum. The background-tracking-digitizing circuits in the AMIS-710214 have been referred to as the “dynamic threshold” two-level A/D converter. For the purpose of describing the module’s characteristics this “dynamic threshold” processing circuit shall herein be referred to as the “tracking digitizer”. 2.0 Key
FEATURES
●●
●
●
●
●
●
●
● Light source, lens and sensor are integrated into a single module 8dpm resolution, 216mm scanning length Up to 440µsec/line scanning speed, with 4.0MHz pixel rate (See Table 3, Note 2) Wide dynamic range Two-level tracking digital output (“Dynamic Threshold Digitizer”) Red (660nm) light source (other colors are available) Compact size ≅ 19.5mm x 21.5mm x 232mm Low power Light weight 3.0 Module
DESCRIPTION
Figure 1: Block Diagram of AMIS-7...
