AMI SEMICONDUCTOR AMIS-710310-DR
The AMIS-710310-DR (PI310MC-DR) is a contact image sensor (CIS) module with an additional on-board circuit that digitizes the analog pixels from the CIS image sensor to a “background-tracking”, two-level digital output signal. The module uses MOS image sensor technology to gain high-speed performance and high sensitivity. The AMIS-710310-DR is suitable for scanning documents with widths of 89mm and with resolutions of 11.8 dots per millimeter (dpm).| Part No. | AMIS-710310-DR |
|---|---|
| Datasheet | AMIS-710310-DR Download |
| Manufacturer |  AMI SEMICONDUCTOR |
| Description | 300dpi Two-Level Digital Output Module |
| Buy | Stock & Price |
GENERAL DESCRIPTION
It has broad applications but is specifically designed for the following areas:● Where data compression is required, such as in data transmissions.
● Where component pin-out count must be kept to a minimum. The background-tracking-digitizing circuits in the AMIS-710310-DR have been referred to as the “dynamic threshold” two-level A/D converter. For the purpose of describing the module’s characteristics, this “dynamic threshold” processing circuit shall herein be referred to as the “tracking digitizer”. 2.0 Key
FEATURES
●●
●
●
●
●
● Light source, lens and sensor are integrated into a single module 11.8dpm resolution, 89mm scanning length Up to 423µsec/line scanning speed, with 2.5MHz pixel rate (see Table 3, Note 3) Wide dynamic range two-level tracking digital output (“Dynamic Threshold Digitizer”) Standard Yellow-Green light source (other colors are available) Compact size ≅ 13mm x 25.6mm x 102mm low power Light weight 3.0 Module
DESCRIPTION
Figure 1: Block Diagr...
