Datasheet4U Logo Datasheet4U.com

A25L16P Datasheet Serial Flash Memory

Manufacturer: AMIC Technology

Overview: A25L16P Series 16 Mbit, Low Voltage, Serial Flash Memory Preliminary Document Title 16 Mbit, Low Voltage, Serial Flash Memory With 85MHz SPI Bus Interface Revision History Rev. No. 0.0 0.1 0.2 0.3 0.4 0.5 With 85MHz SPI Bus Interface History Initial issue Change part no. from A25L160P to A25L16P Change the frequency to 70 MHz Add the Fast Read Dual Input-Output Mode Add QFN 8L (5 x 6mm) package type Top or bottom boot block configuration available Change the frequency to 85 MHz Remove the REMS mode Correct the A25LPT memory organization of Table 2-1 Reduce the options of protected area size to all sectors protected and all sectors unprotected Modify the ICC1 and ICC3 of Table 10 Modify the tW and tBE of Table 11 Issue Date March 10, 2006 March 23, 2006 March 27, 2006 April 20, 2006 December 5, 2006 February 6, 2007 Remark Preliminary 0.6 Add transient voltage (<20ns) on any pin to ground potential spec. April 24, 2007 PRELIMINARY (April, 2007, Version 0.6) AMIC Technology Corp. http://..

Datasheet Details

Part number A25L16P
Manufacturer AMIC Technology
File Size 724.87 KB
Description Serial Flash Memory
Datasheet A25L16P-AMICTechnology.pdf

General Description

The A25L16P is a 16 Mb it (2M x 8) S erial F lash Memor y, with adva nced write prot ection mecha nisms, accessed b y a high speed S

Key Features

  • 16 Mbit of Flash Memory.
  • Flexible Sector Architecture (4/4/8/16/32)KB/64x31 KB.
  • Bulk Erase (16 Mbit) in 20s (typical).
  • Sector Erase (512 Kbit) in 1s (typical).
  • Page Program (up to 256 Bytes) in 1.5ms (typical).
  • 2.7 to 3.6V Single Supply Voltage.
  • SPI Bus Compatible Serial Interface.
  • 85MHz Clock Rate (maximum).
  • Fast Read Dual Operation Instruction (3Bh/BBh).
  • Deep Power-down Mode 1µA (typical).
  • Top o.

A25L16P Distributor