Datasheet4U Logo Datasheet4U.com

A29160A - Boot Sector Flash Memory

General Description

on programming data to the device using both standard and Unlock Bypass command sequence.

AMIC Technology, Corp.

Key Features

  • Single power supply operation - Full voltage range: 4.5 to 5.5 volt for read and write operations.
  • Access time: - 55ns (max. ).
  • Current: - 20mA typical active read current - 30mA typical program/erase current - 6uA typical CMOS standby ( WP = VCC or Float).
  • Flexible sector architecture - 16 Kbyte/ 8 KbyteX2/ 32 Kbyte/ 64 KbyteX31 sectors - 8 Kword/ 4 KwordX2/ 16 Kword/ 32 KwordX31 sectors - Any combination of sectors can be erased - Supports full chip erase -.

📥 Download Datasheet

Datasheet Details

Part number A29160A
Manufacturer AMIC Technology
File Size 499.23 KB
Description Boot Sector Flash Memory
Datasheet download datasheet A29160A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
A29160 Boot Sector Flash Memory AMIC
A29160B Boot Sector Flash Memory AMIC
A29161A Boot Sector Flash Memory AMIC
A2917 Dual Full Bridge PWM Motor Driver Allegro Micro Systems
A2918 DUAL FULL-BRIDGE PWM MOTOR DRIVER Allegro MicroSystems

Other Datasheets by AMIC Technology

Part Number Description
A29001 Boot Sector Flash Memory
A290011 Boot Sector Flash Memory
A29002 256K X 8 Bit CMOS 5.0 Volt-only/ Boot Sector Flash Memory
A290021 256K X 8 Bit CMOS 5.0 Volt-only/ Boot Sector Flash Memory
A29010 128K X 8 Bit CMOS 5.0 Volt-only/ Uniform Sector Flash Memory

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
A29160A Series 2M X 8 Bit / 1M X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory Document Title 2M X 8 Bit / 1M X 16 Bit CMOS 5.0 Volt-only, Boot Sector Flash Memory Revision History Rev. No. 0.0 1.0 1.1 1.2 History Initial issue Update ICC3, ICC4, Absolute Maximum Rating, Program/Erase time and Data Retention Page 6 “Writing Commands/Command Sequences” section : Change The “Word/Byte Program Command Sequence” section has details on programming data to the device using both standard and Unlock Bypass command sequence. Into The “Word/Byte Program Command Sequence” and “Unlock Bypass Command Sequence” has detail descriptions on programming data to the device using both standard and Unlock Bypass command sequence.