8073C Datasheet | AMOT

Solid State Relay Module Model 8073C Typical applications l Robust solid state relay module for use with the 8071D controller - see Datasheet_8071_Controller l Heavy duty interface for use between electronic valve controllers having either two relay outputs or two logic outputs and an electrically actuated valve Key benefits l Significantly extended lifetime and increased reliability over electro-mechanical relay switching modules l Allows electric valve controllers to be used in arduous environments where continuous switching may be required l Sealed enclosure Model 8073C Solid State Relay Datasheet_8073C_Solid_State_Relay_0411_Rev1 .amot. Free Datasheet http://.datasheet-pdf./ Solid State Relay - Model 8073C Installation Housed within an IP67 enclosure the unit is easily installed within a panel or can be wall mounted. Although intended for use with the AMOT 8071D controller, the unit can also be connected to any other electric controller with switched or logic level outputs. Specification Supply voltage Voltage rating 110 to 240 VAC Frequency: 50/60 Hz Relay inputs (contact driven) Voltage range 110V to 240 VAC Logic inputs Voltage range Outputs Environment 5 to 30 VDC Contact current: <40m A Drive current: <20m A Rated to drive all AMOT p ACT actuators. Transient protection: 600V (L to L1, L2) Ambient temperature: Ambient humidity: Approximate net weight: -20°C to 50°C (-4°F to 122°F) 20% - 80% 0.5kg (1.1 lbs) Dimensions Dimensions in mm Wiring diagrams Datasheet_8073C_Solid_State_0411_Rev1 page 2 Free Datasheet http://.datasheet-pdf./ Americas AMOT USA 8824 Fallbrook Dr Houston, TX 77064 USA Tel Fax Email +1 (281) 940 1800 +1 (713) 559 9419 general: sales@amotusa. orders: orders@amotusa. customer service: cs@amotusa. Europe, Middle East and Africa AMOT Western Way Bury St Edmunds Suffolk, IP33 3SZ England Tel +44 (0) 1284 762222 Fax +44 (0) 1284 760256 Email...