AWL9232 Datasheet | ANADIGICS

FEATURES AW L9 APPLICATIONS - 802.11b/g WLAN in Consumer Electronics Products (e.g., cell phones, MP3 players, cameras, etc.) - 2.4 GHz Cordless Phone Handsets/Basestations The ANADIGICS AWL9232 is a high performance In Ga P HBT power amplifier, low-noise amplifier and RF switch integrated on a single IC. It is particularly applicable in consumer electronics products (e.g., cell phones, MP3 players, cameras, etc.) that integrate 802.11b/g WLAN in the 2.4 - 2.5 GHz band. Matched to 50  on all RF ports, the part requires only one .. choke inductor and one power supply decoupling cap off-chip. The antenna port is switched between WLAN transmit, WLAN receive and Bluetooth paths with a low-loss single-pole triple-throw RF switch. The transmit path PA exhibits unparalleled linearity for both IEEE 802.11g and 802.11b WLAN systems under the toughest signal configurations within these standards. The WLAN receive path from the antenna port to receiver output port provides a low noise, high-gain path to the system receiver chain. The AWL9232 is biased by a single +3.8 V supply and consumes ultra-low current in the OFF mode. S35 Package 16 Pin 3 mm x 3 mm x 0.55 mm Surface Mount ULPCC The AWL9232 is manufactured using advanced In Ga P HBT technology that offers state-of-the-art reliability, temperature stability and ruggedness. It is provided in a 3 x 3 x 0.55 mm ULPCC package optimized for a 50  system. PRODUCT DESCRIPTION GN D Bias Network Rx RF OUT WLAN Rx Enable BLUETOOTH Enable WLAN Tx Enable Tx RF IN Output Match BLUE T OOT H Vcc Antenna Control Logic Input Match Output Match Bias Network GN D Figure 1: Block Diagram and Pinout 04/2008 Vcc AWL9232 Table 1: Pin Description PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 NAME DESCRIPTION BLUETOOTH Bluetooth RFPort GND RX_RF GND LNA_EN BT_EN PA_EN GND PA_IN GND V CC1 VCC2 N/C GND ANT GND Ground Receive RFPort Ground LNAEnable.On/Offcontrolforthe Rx Pathlownoiseamplifier Bluetooth...