AWL9565HS41Q7 Datasheet | ANADIGICS

FEATURES - - - - - - - - - - - - - 3% Dynamic EVM @ Pout = +18 d Bm with IEEE 802.11a 64 QAM OFDM at 54 Mbps 30 d B of Linear Power Gain Single +3.3 V Nominal Supply SP3T RF Switch w/Bluetooth and 2 GHz Band Tx/Rx 1.0 d B 2 GHz Band RF Switch Tx Path Insertion Loss 1.6 d B 2 GHz Band RF Switch BT & Rx Path Insertion Loss SP2T RF Switch for 5 GHz Band Tx/Rx Function 2.7 d B 5 GHz Band RF Switch Rx Path Insertion Loss 5 GHz Band TX Power Detector 1.8 V CMOS Logic Level Control 50 V-Matched RF Ports Leadfree and Ro HS pliant 3 x 3 x 0.55 mm QFN Package AWL9565 Data Sheet - Rev 2.0 AW L9 3 mm x 3 mm x 0.55 mm Surface Mount Front End IC APPLICATIONS - 802.11a/b/g/n WLAN +Bluetooth for Fixed, Mobile, and Handheld applications. The AWL9565 is manufactured using advanced In Ga P HBT technology that offers state-of-the-art reliability, temperature stability and ruggedness. 5G RX BT Vbt Vrx2 PRODUCT DESCRIPTION The ANADIGICS AWL9565 is a high performance In Ga P HBT FEIC that incorporates a 5 GHz power amplifier, 5 GHz SP2T RF Switch and 2 GHz SP3T RF switch. The FEIC is designed for WLAN transmit and receive applications in the 2.412-2.484 and 5.15-5.85 GHz bands. Matched to 50 Ohms and DC blocked at all RF inputs and outputs, the part requires no additional RF matching ponents off-chip. The antenna ports are switched between WLAN transmit, WLAN receive, Bluetooth, and simultaneous WLAN and Bluetooth paths with low loss RF switches. The PA exhibits unparalleled linearity and efficiency for IEEE 802.11a/n WLAN systems under the toughest signal configurations within the standard. An on-chip power detector is incorporated in 5 GHz transmit path of the FEIC. All control circuits operate with +1.8 V CMOS logic and consume ultra-low current in the OFF mode. Vtx2 2G RX BT A RX N T TX 2G ANT SP3T T/R SW SP2T T/R SW 5G TX PA 5G 2G TX Detector RX TX 5G ANT Vdet PAon Vcc Vtx5 Vrx5 Figure 1: Block Diagram 05/2011 AWL9565 20 2G ANT 19 GND 18 17...