Datasheet4U.com

ADP3207 Datasheet PDF

Analog Devices ADP3207

The ADP3207 uses a multimode architecture to drive the logiclevel PWM outputs at a programmable switching frequency that can be optimized depending on the output current requirement. The part switches between multiphase and single-phase operation to maximize its effectiveness under all load conditions. In addition, the ADP3207 includes a programmable slope function to adjust the output voltage as a function of the load current.
Part No. ADP3207
Datasheet ADP3207 Download
Manufacturer
Analog Devices
Description 7-Bit Programmable Multiphase Mobile CPU Synchronous Buck Controller
Buy Stock & Price
ADP3207 datasheet page 1 preview

FEATURES

1-, 2-, or 3-phase operation at up to 750 kHz per phase ±8 mV worst-case differential sensing error over temperature Interleaved PWM outputs for driving external high power MOSFET drivers Automatic power-saving modes maximize efficiency during light load and deeper sleep operation Soft transient control reduces inrush current and audio noise Active current balancing between output phases Independent current limit and load line setting inputs for additional design flexibility Built-in power-good masking supports VID on-the-fly 7-bit digitally programmable 0.3 V to 1.5 V output Overload and short-circuit protection with programmable latch-off delay Built-in clock enable output delays CPU clock until CPU supply voltage stabilizes EN 1 FUNCTIONAL BLOCK DIAGRAM VCC 31 VRPM RRPM RT RAMPADJ 12 13 14 15 UVLO SHUTDOWN AND BIAS ADP3207 OSCILLATOR CMP GND 20 TTSENSE 30 + – SET EN RESET 1/2/3 – PHASE DRIVER LOGIC RESET 26 PWM1 VRTT 29 THERMAL THROTTLING CONTROL CURRENT BALANCING CIRCUIT C...
ADP3207 page 2 preview ADP3207 page 3 preview