AND124G Datasheet | AND

Features - Low power requirement - Stand-off or flush-mount - All plastic molded lens - Color: Ga P- Green Optical Characteristics (Ta = 25°C) Part Number AND124G Color LED Green Lens Green Diffused Lens Desc. Axial Luminous Intensity (mcd) Min. 8 Typ. 20 Test Condition (IF- m A) 10 Viewing Angle 2θ1/2 (deg) 60 2.1 max 1.0 0.5 0.5 1.5 2.54 1.5 25.5 Absolute Maximum Ratings (Ta = 25°C) 1. Anode 2. Cathode Characteristics Symbol IF VR PD TOpr TStg Rating 25 5 105 -40 to +85 -40 to +85 Unit m A V m W °C °C 0.5 Forward Current (DC) Reverse Voltage Power Dissipation Operating Temperature Storage Temperature Range Electro-Optical Characteristics (Ta = 25°C) Green Characteristics Forward Voltage Reverse Current Peak Emission Wavelength Spectral Line Half Width Symbol VF IR λp λ Test Condition Min. IF = 20m A VR = 5 V IF = 15m A IF = 15m A - - - - Typ. 2.1 - 565 30 Max. 2.5 10 - - V µA nm nm Unit Precaution Please be careful of the following: 1. Soldering temperature: 260°C max; Soldering time: 3 sec. max; Soldering portion of lead: up to 2 mm from the body of the device. 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation - 720 Palomar Avenue - Sunnyvale, CA 94085 Tel: 408.523.8200 - Fax: 408.733.1287 - email@purdyelectronics. 4/4/05 .purdyelectronics. Standard LED IF vs. VF 50 30 TA = 25°C 30° 40° 50° 60° 70° 80° 90° 1.0 1.8 1.9 2.0 2.1 Forward Voltage VF (V) 2.2 2.3 0.8 0.6 0.4 0.2 0 0.2 0.4 0.6 0.8 20° Radiation Pattern 10° 0° 10° Standard Bright LED LAMPS Forward Current IF (m A) 20 10 5 3 2 1 1.7 20° 30° 40° 50° 60° 70° 80° 90° 1.0 IV vs. IF 5...