TP5.0SMDJ14CA Datasheet | ANOVA

Features - Optimized glass passivated chip - Tj = 150 °C capability suitable for high reliability and automotive requirement - 5000 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle):0.01 % - Meet ISO 7637-2 load dump test (varied by test condition) - High reliability application and automotive grade AEC Q101 qualified - Low leakage - Uni and Bidirectional unit - Excellent clamping capability - Very fast response time - Ro HS pliant Mechanical Data - Case: Molded plastic - Epoxy: UL 94V-0 rate flame retardant - Lead: Solderable per MIL-STD-750, method 2026 - Polarity: Color band denotes cathode end except Bipolar - Mounting position: Any SMC/ DO-214AB Maximum Ratings(TA=25℃ unless otherwise noted) Parameter Peak power dissipation with a 10/1000μs waveform(1) Peak pulse current wih a 10/1000μs waveform(1) Symbol Value PPP 5000 IPP See Next Table Power dissipation on infinite heatsink at TL = 50 °C Peak forward surge current, 8.3 ms single half sinewave unidirectional only(2) PD IFSM 6.5 300 Maximum instantaneous forward voltage at 100A for unidirectional only Operating junction and storage temperature range Note: TJ, TSTG - 55 to +150 (1)Non-repetitive current pulse per Fig.5 and derated above TA= 25 °C per Fig.1 (2)Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum Unit W A...