Anpec Electronics APL3512
The APL3512A/B is a power-distribution switch with some protection functions that can deliver current up to 2A. The device incorporates a 90mΩ N-channel MOSFET power switch that is controlled by an enable logic pin and has a SS pin dedicated to soft-start ramp-up rate control that can be used in application where the inrush current is concerned. The device integrates some protection features, including current-limit protection, short-circuit protection, overtemperature protection, and UVLO.| Part No. | APL3512 |
|---|---|
| Datasheet | APL3512 Download |
| Manufacturer |  Anpec Electronics |
| Description | Power-Distribution Switches |
| Buy | Stock & Price |
FEATURES
●●
●
●
●
●
●
●
●
● 90mΩ High Side MOSFET 2A Continuous Current Soft-Start Time Programmable by External Capacitor Wide Supply Voltage Range: 2.7V to 5.5V Current-Limit and Short-Circuit Protections Under-Voltage Lockout Protection Reverse Current Blocking when Switch Disabled Over-Temperature Protection Logic Level Enable Input APL3512A: Active High APL3512B: Active Low Lead Free and Green Devices Available (RoHS Compliant)
GENERAL DESCRIPTION
The current-limit and short-circuit protection can protect down-stream devices from catastrophic failure by limiting the output current at current-limit threshold during over-load or short-circuit events. When VOUT drops below VIN-1.5V the devices limit the current to a lower and safe level. The over-temperature protection function shuts down the N-channel MOSFET power switch when the junction temperature rises beyond 140oC and will automatically turns on the power switch when the temperature drops by 20oC. The UVLO function keeps the power switch in off state until there is a valid input voltage present.
