Anpec Electronics APL5330
The APL5330 integrates a power transistor to provide regulated voltage with maximum output current of 2A. It also incorporates current-limit, thermal shutdown and shutdown control functions into a single chip. The current-limit circuit limits the maximum output current in overload or short-circuit conditions.| Part No. | APL5330 |
|---|---|
| Datasheet | APL5330 Download |
| Manufacturer |  Anpec Electronics |
| Description | Dual Input 2A Low Dropout Regulator |
| Buy | Stock & Price |
FEATURES
●●
GENERAL DESCRIPTION
The on-chip thermal shutdown provides protection against any combination of overload that would create excessive junction temperature. The output voltage of the APL5330 tracks the reference voltage on VREF pin. A resistor divider connected to VREF pin is usually used to provide reference voltage to the IC. In addition, an external ceramic capacitor and an open-drain transistor connected to VREF pin provides soft-start and shutdown control. Applying and holding a voltage below 0.35V (typ.) to VREF shuts off the output. Fast Transient Response High Output Accuracy - ±20mV over Load, Output Voltage Offset and Temperature Adjustable Output Voltage by External Resistors●
●
●
●
●
● Current-Limit Protection On-Chip Thermal Shutdown Shutdown for Standby or Suspend Mode Simple SOP-8 and SOP-8 with Thermal Pad Packages Lead Free Available (RoHS Compliant)
APPLICATIONS
●● VGA Card Power Chip Set Power Pin Configuration VIN GND VREF VOUT 1 2 3 4 8 7 6 5 VCNTL VCN...
