SURTA2000XL Datasheet | APC

APC Smart-UPS® RT SURTA1500XL/SURTA1500XLJ/SURTA2000XL Uninterruptible Power Supply User Manual Introduction/Before Installation About this Manual The APC Smart-UPS® RT (SURTA1500XL, SURTA1500XLJ, and SURTA2000XL) is a highperformance, Uninterruptible Power Supply (UPS) designed to prevent blackouts, brownouts, sags and surges from reaching your puters, servers, and other sensitive electronic equipment. This manual describes procedures on how to properly unpack and install the UPS, connect the battery and equipment, configure accessories, and start up the system. Illustrations are representative. Your configuration, including ponents and optional APC equipment, may be different from the models shown in this manual. The user manual is accessible from the supplied CD and the APC web site, .apc.. Contact Information Refer to .apc. to contact APC or for additional information about this product. Safety Information Read the Safety Guide before you begin the installation, operate the UPS, or perform equipment maintenance. Failure to ply with safety instructions Warning could result in bodily injury or equipment damage. Unpacking and Equipment Placement The UPS is heavy. Two people are required to lift the UPS. Select a location sturdy enough to handle the weight of the UPS. Heavy 1. Unpack the equipment. The packaging is recyclable; save it for reuse or dispose of it properly. 2. Inspect the equipment upon receipt. Notify the carrier and dealer if there is damage. 3. Check the package contents: - UPS and front bezel - UPS literature kit containing: - product documentation - safety information - warranty information 120 V models: - Power Chute® CD - Serial and USB munication cables 100 V models: - Serial munication cable 4. Place the UPS where it will be used. - Ensure that air vents on the front and rear of the UPS are not blocked. Installation - Do not operate the UPS where there is excessive dust or the temperature or humidity are...