SURTD6000RMXLP Datasheet | APC

User Manual Smart-UPS™RT Uninterruptible Power Supply SURTD5000RMXLP SURTD6000RMXLP 120/208/240 Vac SURTD6000RMXLJP 100/200 Vac Rack Mount 3U/Tower Smart-UPSTM RT Uninterruptible Power Supply SURTD5000/6000RMXLP 120/208/240 Vac SURTD6000RMXLJP 100/200 Vac Rack-Mount 3U/Tower PRODUCT DESCRIPTION The APCTM by Schneider Electric Smart-UPSTM RT is a high performance, uninterruptible power supply (UPS) that provides protection for electronic equipment from utility power blackouts, brownouts, sags, and surges. The UPS filters small utility line fluctuations and isolates electronic equipment from large disturbances by internally disconnecting from utility line power. The UPS provides continuous power from the internal battery until utility power returns to safe levels or the battery is fully discharged. SAFETY AND GENERAL INFORMATION INSPECT THE PACKAGE CONTENTS UPON RECEIPT. NOTIFY THE CARRIER AND DEALER IF THERE IS ANY DAMAGE. READ THE SAFETY INFORMATION IN THIS MANUAL BEFORE INSTALLING THE UPS. - Adhere to all national and local electrical codes. - All wiring must be performed by a qualified electrician. - Changes and modifications to this unit not expressly approved by APC could void the warranty. - This unit is intended for indoor use only. - Do not operate this unit in direct sunlight, in contact with fluids, or where there is excessive dust or humidity. - Be sure the air vents on the unit are not blocked. Allow adequate space for proper ventilation. - Connect the UPS power cable directly to a wall outlet. Do not use surge protectors or extension cords. - 230 V models only: In order to maintain pliance with the EMC directive for products sold in Europe, output cords attached to the UPS must not exceed 10 meters in length. - Leakage current for a pluggable Type A UPS may exceed 3.5 m A when a separate ground terminal is used. - The protective earth conductor for the UPS carries the leakage current from the load devices (puter equipment). An insulated ground...