PHAP338x Datasheet | APEM

features and specifications ❑ Wide range of case formats ❑ SMT and through-hole models ❑ Normally closed models available Models Performances Current/voltage rating Contact resistance Insulation resistance Dielectric strength .. PHAP3381 PHAP3382 PHAP3383 PHAP3384 PHAP3390 PHAP3391 PHAP3371 PHAP3372 PHAP3373 PHAP3374 PHAP3378 PHAP3355 PHAP3361 PHAP3362 PHAP3363 PHAP3365 PHAP3366 PHAP3301 PHAP3302 PHAP3303 PHAP3305 PHAP3306 PHAP3307 PHAP3308 PHAP3368 PHAP3350 PHAP3351 PHAP3352 PHAP3353 PHAP3320 PHAP3321 50m A 12VDC 100 mΩ max. 100 MΩ min. 250 VAC min. (1 minute) 70.000 1,6N ± 0,5N 0,20/ 0,25 mm 75.000 1,6N +0,5/-0,3N 0,25 mm 30.000 1,8N ± 0,5N 0,25 mm 100.000 1,6N ± 0,5N 0,25 mm 100.000 2N ± 0,3N 0,50 mm 100.000 1,6N ± 0,5N 0,30 mm Electrical life (cycles) Operating force Travel Operating temperature Storage temperature Vibrations IR reflow soldering Wave soldering Manual soldering -20°C to +70°C -30°C to +80°C 10-500 Hz / 10 g 240°C for 20 seconds max. 255°C for 5 seconds max. 300°C for 3 seconds max. - Dimensions : First dimensions are in mm while inches are shown as bracketted numbers. Packaging unit : 1.000 pieces and multiples, except for tape and reel packaging (see following pages). APEM .apem. C-3 PHAP33 series SMT tact switches Microminiature and ultra-low profile - 4,2 x 4,2 mm case - Ultra-pact size for board space saving : 4,2 x 4,2 mm case, 1,5 mm button height from PCB - Reflow solderable - With or without positioning pins - For tape and reel packaging, add ”R” at the end of model number. With positioning pins Ø0.70 (.028DIA) 0.60 (.024) 1.40 (.055) Model number PHAP3390 4.20 (.165) ø0.80 (.031 DIA) Ø2.00 (.079DIA) 1 3 2.60 (.102) 6.00 (.236) 1.50 (.059) 1.10 (.043) 3.50 (.137) 4.40...