ASB ALN0071WT
ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment.| Part No. | ALN0071WT |
|---|---|
| Datasheet | ALN0071WT Download |
| Manufacturer |  ASB |
| Description | Internally Matched LNA Module |
| Buy | Stock & Price |
FEATURES
● S21 = 22.1 dB@65 MHz = 21.9 dB@75 MHz● NF of 0.9 dB over Frequency
● Unconditionally Stable
● Single 5 V Supply
● High OIP3 at Low Current
DESCRIPTION
The plerowTM The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Specifications (in Production) Typ.@T = 25 C, Vs = 5 V, Freq. = 70 MHz, Zo.sys = 50 ohms Parameter Specifications Unit Min Typ Max Frequency Range MHz 65 75 Gain dB 21 22 Gain Flatness dB 0.1 0.2 Noise Figure dB 0.9 0.95 Output IP3 (1) dBm 29 30 S11/S22 (2) dB -18/-10 Output P1dB dBm 20 21 Switching Time (3) sec Supply Current mA 60 80 Supply Voltage V 5 Impedance 50 Max. RF Input Power dBm C.W 23~25 (before fail) Package Type & Size mm Surface Mount Type, 10Wx10Lx3.8H Operating temperature is -40 C to +85 C. 1) OIP3 is measured with two tones at an output power of 4 dBm/tone separated by 1 MHz.
