ASB ALN0838AT
ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment.| Part No. | ALN0838AT |
|---|---|
| Datasheet | ALN0838AT Download |
| Manufacturer |  ASB |
| Description | Internally Matched LNA |
| Buy | Stock & Price |
FEATURES
● S21 = 21.2 dB @ 824 MHz = 20.8 dB @ 849 MHz● NF of 0.70 dB over Frequency
● Unconditionally Stable
● Single 5V Supply
● High OIP3 @ Low Current
DESCRIPTION
The plerowTM The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Specifications (in Production) Typ. @ T = 25C, Vs = 5 V, Freq. = 836.5 MHz, Zo.sys = 50 ohm Parameter Frequency Range Gain Gain Flatness Noise Figure Output IP3 (1) S11 / S22 (2) Output P1dB Switching Time (3) Supply Current Supply Voltage Impedance Max. RF Input Power Package Type & Size Unit MHz dB dB dB dBm dB dBm sec mA V dBm mm Specifications Min Typ Max 824 849 20 21 0.2 0.3 0.70 0.75 27 28 -19 / -9 14 15 40 60 5 50 C.W 29 ~ 31 (before fail) Surface Mount Type, 10Wx10Lx3.8H Operating temperature is -40C to +85C. 1) OIP3 is measured with two tones at an output power of +0 dBm / tone separated by 1 MHz.
