ASB ALN1301
ALN-series is the compactly designed surface-mount module for the use of the LNA with or without the following gain blocks in the infrastructure equipment of the mobile wireless (CDMA, GSM, PCS, PHS, WCDMA, DMB, WLAN, WiBro, WiMAX), GPS, satellite communication terminals, CATV and so on. It has an exceptional performance of low noise figure, high gain, high OIP3, and low bias current. The stability factor is always kept more than unity over the application band in order to ensure its unconditionally stable implementation to the application system environment.| Part No. | ALN1301 |
|---|---|
| Datasheet | ALN1301 Download |
| Manufacturer |  ASB |
| Description | Internally Matched LNA Module |
| Buy | Stock & Price |
FEATURES
● S21 = 33.0 dB@1200 MHz = 32.0 dB@1400 MHz● NF of 0.7 dB over Frequency
● Unconditionally Stable
● Single 5 V Supply
● High OIP3@Low Current
DESCRIPTION
The plerowTM The surface-mount module package including the completed matching circuit and other components necessary just in case allows very simple and convenient implementation onto the system board in mass production level. Specifications (in Production) Typ.@T = 25 C, Vs = 5 V, Freq. = 1300 MHz, Zo.sys = 50 ohms Parameter Specifications Unit Min Typ Max Frequency Range MHz 1200 1400 Gain dB 31.5 32.5 Gain Flatness dB 0.5 0.6 Noise Figure dB 0.7 0.75 Output IP3 dBm 35 36 S11/S22 dB -15/-15 Output P1dB dBm 19 20 Switching Time (3) sec - Supply Current mA 140 160 Supply Voltage V 5 Impedance 50 Max. RF Input Power dBm C.W 23~25 (before fail) Package Type & Size mm Surface Mount Type, 13Wx13Lx3.8H Operating temperature is -40C to +85C. 1) OIP3 is measured with two tones at an output power of +4 dBm/tone separated by 1 MHz.
