Datasheet4U Logo Datasheet4U.com

IPS101I-SO - Power Factor Correction Controller

Download the IPS101I-SO datasheet PDF. This datasheet also covers the IPS101 variant, as both devices belong to the same power factor correction controller family and are provided as variant models within a single manufacturer datasheet.

General Description

The IN-PLUG® IPS101 is a special line-side switching controller which provides simple yet high performance active power factor correction.

The IPS101 was optimized for electronic ballast compact SMPSs up to 300W that requires a minimum board area, reduced component count and high efficiency.

Key Features

  • Simple and easy to use.
  • High efficiency over 96% (in optimized designs).
  • Minimum external component count for lowest cost.
  • 3-input current-mode multiplier ensures outstanding performance at any line voltage and any load.
  • Under voltage protection.
  • Voltage error amplifier with provision for loop stability compensation.
  • Cycle to cycle current limiting.
  • Thermal shut-down.
  • Capable of driving a broad range of powe.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (IPS101-ASICAdvantage.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number IPS101I-SO
Manufacturer ASIC Advantage
File Size 320.27 KB
Description Power Factor Correction Controller
Datasheet download datasheet IPS101I-SO Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IPS1011 INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS1011PBF INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS1011R INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS1011RPBF INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS1011S INTELLIGENT POWER LOW SIDE SWITCH International Rectifier

Other Datasheets by ASIC Advantage

Part Number Description
IPS101I-D Power Factor Correction Controller
IPS101 Power Factor Correction Controller
IPS101C-D Power Factor Correction Controller
IPS101C-SO Power Factor Correction Controller
IPS20 Low-Voltage Current Sensing Precision Feedback Controllers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IN-PLUG® IPS101 Datasheet – Rev.10 - High Efficiency Power Factor Correction Controller IN-PLUG® series: IPS101 Low Cost, High Efficiency Power Factor Correction Controller INTRODUCTION – REVISION 10 - DESCRIPTION The IN-PLUG® IPS101 is a special line-side switching controller which provides simple yet high performance active power factor correction. The IPS101 was optimized for electronic ballast compact SMPSs up to 300W that requires a minimum board area, reduced component count and high efficiency. The PFC forces the SMPS to draw a current proportional to the instant AC line voltage in order to charge a storage capacitor thus resulting in excellent power factor and low line harmonics generation.