Datasheet4U Logo Datasheet4U.com

IPS20 - Low-Voltage Current Sensing Precision Feedback Controllers

General Description

IN-PLUG® IPS20 & IPS21 Integrated Circuits are low-voltage current sensing feedback controllers used in Switch Mode Power Supplies to control load-side current and voltage.

Key Features

  • Dual precision regulators for SMPS voltage and current control.
  • Output currents up to 50A.
  • Output voltage down to 1.2V.
  • 50mV or 100mV current sensing voltage.
  • 1.20V voltage reference.
  • Operates with grounded optocoupler.
  • 4V shunt regulator for VCC supply.

📥 Download Datasheet

Datasheet Details

Part number IPS20
Manufacturer ASIC Advantage
File Size 154.67 KB
Description Low-Voltage Current Sensing Precision Feedback Controllers
Datasheet download datasheet IPS20 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IPS2041LPBF INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS2041RPBF INTELLIGENT POWER LOW SIDE SWITCH International Rectifier
IPS2050H high-side switch STMicroelectronics
IPS2050H-32 high-side switch STMicroelectronics
IPS2050HQ high-side switch STMicroelectronics

Other Datasheets by ASIC Advantage

Part Number Description
IPS21 Low-Voltage Current Sensing Precision Feedback Controllers
IPS101 Power Factor Correction Controller
IPS101C-D Power Factor Correction Controller
IPS101C-SO Power Factor Correction Controller
IPS101I-D Power Factor Correction Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IN-PLUG® IPS20 & IPS21 Preliminary Datasheet – Rev3 - Voltage / Current Feedback Controllers IN-PLUG® series: IPS20 & IPS21 Low-Voltage Current Sensing Precision Feedback Controllers for Maximum Efficiency at Any Output Current INTRODUCTION PRELIMINARY – REV3 - DESCRIPTION IN-PLUG® IPS20 & IPS21 Integrated Circuits are low-voltage current sensing feedback controllers used in Switch Mode Power Supplies to control load-side current and voltage. They have been designed to limit the power dissipated in the sensing circuitry for high output current applications that require current limiting. They also provide excellent loop stability and superb transient response. They both incorporate a 4V shunt regulator for maximum flexibility to power the chip.