ASIX AX88180
The AX88180 is a high-performance and cost-effective non-PCI Gigabit Ethernet controller for various embedded systems including consumer electronics and home network markets that require a higher bandwidth of network connectivity. The AX88180 supports 16/32-bit SRAM-like host interface and Gigabit Ethernet MAC, which is IEEE802.3 10Base-T, IEEE802.3u 100Base-T, and IEEE802.3ab 1000Base-T compatible. The AX88180 supports full-duplex or half-duplex operation at 10/100Mbps speed and supports full-duplex operation at 1000Mbps speed.| Part No. | AX88180 |
|---|---|
| Datasheet | AX88180 Download |
| Manufacturer |  ASIX |
| Description | High-Performance Non-PCI 32-bit 10/100/1000M Gigabit Ethernet Controller |
| Buy | Stock & Price |
FEATURES
● High-performance non-PCI local bus Support 10/100/1000Mbps data rate with RGMII 16/32-bit SRAM-like host interface (US Patent or MII in 10/100Mbps data rate. Approval) Support back-pressure flow control for half-duplex Support big/little endian data bus type operation Large embedded SRAM for packet buffers Support packet length set by software 32K bytes for receive buffer Support max 4K bytes JUMBO packet 8K bytes for transmit buffer● Support Wake-on-LAN function by following events Support IP/TCP/UDP checksum offloads Detection of network link-up state Support interrupt with high or low active trigger Receipt of a Magic Packet mode
● Support Magic Packet detection for remote wake-up
● Highly-integrated Gigabit Ethernet controller after power–on reset Compatible with IEEE802.3, 802.3u, and 802.3ab
● Support EEPROM interface standards
● Support PCMCIA in 16-bit mode Support 10/100/1000Mbps data rate
● Support synchronous or asynchronous mode to host Support full duplex opera...
