AT43DK312A
Features
- -
- -
- Instant Prototype With the AT43312A Hub Controller Reduce Design Cycle Reduce System Debugging Simplify ponent Selection Avoid Typical Design Problems
Overview
The AT43DK312A es with everything designers need to develop a full-featured USB Hub. To eliminate typical prototyping hassles, a fully populated stand-alone hub is included. Designers can take the stand-alone hub from the box to the system to see the operation of the AT43312A hub controller chip. An application note explains the ponent selection and resolves typical problems for the designer.
USB Hub Development Kit AT43DK312A
Rev. 1641A- 04/00
Stand-alone Hub
The hub may immediately be plugged into any USB system. The only requirements are that the system has an operational USB port and that the system has the USB drivers enabled on the operating system. The bus-powered portion of the controller will configure without the power supply attached. However, the power supply must be connected if the devices...
