AT892051 Datasheet | Atmel

Features - patible with MCS-51™ Products - 2K Bytes of Reprogrammable Flash Memory - - - - - - - - - - - - Endurance: 1,000 Write/Erase Cycles 2.7V to 6V Operating Range Fully Static Operation: 0 Hz to 24 MHz Two-Level Program Memory Lock 128 x 8-Bit Internal RAM 15 Programmable I/O Lines Two 16-Bit Timer/Counters Six Interrupt Sources Programmable Serial UART Channel Direct LED Drive Outputs On-Chip Analog parator Low Power Idle and Power Down Modes Description The AT89C2051 is a low-voltage, high-performance CMOS 8-bit microputer with 2K Bytes of Flash programmable and erasable read only memory (PEROM). The device is manufactured using Atmel’s high density nonvolatile memory technology and is patible with the industry standard MCS-51™ instruction set. By bining a versatile 8-bit CPU with Flash on a monolithic chip, the Atmel AT89C2051 is a powerful microputer which provides a highly flexible and cost effective solution to many embedded control applications. The AT89C2051 provides the following standard features : 2K Bytes of Flash, 128 bytes of RAM, 15 I/O lines, two 16-bit timer/counters, a five vector two-level interrupt architecture, a full duplex serial port, a precision analog parator, on-chip oscillator and clock circuitry. In addition, the AT89C2051 is designed with static logic for operation down to zero frequency and supports two software selectable power saving modes. The Idle Mode stops the CPU while allowing the RAM, timer/counters, serial port and interrupt system to continue functioning. The Power Down Mode saves the RAM contents but freezes the oscillator disabling all other chip functions until the next hardware reset. 8-Bit Microcontroller with 2K Bytes Flash AT89C2051 Pin Configuration PDIP/SOIC /VPP 0368D-B- 12/97 4-15 Block Diagram 4-16 AT89C2051 AT89C2051 Pin Description VCC Supply voltage. GND Ground. Port 1 Port 1 is an 8-bit bidirectional I/O port. Port pins P1.2 to P1.7 provide internal pullups. P1.0 and P1.1 require external...