AT91SAM7L128 Datasheet | Atmel

Features - Incorporates the ARM7TDMI® ARM® Thumb® Processor - High-performance 32-bit RISC Architecture - High-density 16-bit Instruction Set - Leader in MIPS/Watt - Embedded ICE™ In-circuit Emulation, Debug munication Channel Support - Internal High-speed Flash - 128 Kbytes (AT91SAM7L128), Organized in 512 Pages of 256 Bytes Single Plane - 64 Kbytes (AT91SAM7L64), Organized In 256 Pages of 256 Bytes Single Plane - Single Cycle Access at Up to 15 MHz in Worst Case Conditions - 128-bit Read Access - Page Programming Time: 4.6 ms, Including Page Auto Erase, Full Erase Time: 10 ms - 10,000 Write Cycles, 10-year Data Retention Capability, Sector Lock Capabilities, Flash Security Bit - Fast Flash Programming Interface for High Volume Production - Internal High-speed SRAM, Single-cycle Access at Maximum Speed - 6 Kbytes - 2 Kbytes Directly on Main Supply That Can Be Used as Backup SRAM - 4 Kbytes in the Core - Memory Controller (MC) - Enhanced Embedded Flash Controller, Abort Status and Misalignment Detection - Enhanced Embedded Flash Controller (EEFC) - Interface of the Flash Block with the 32-bit Internal Bus - Increases Performance in ARM and Thumb Mode with 128-bit Wide Memory Interface - Reset Controller (RSTC) - Based on Zero-power Power-on Reset and Fully Programmble Brownout Detector - Provides External Reset Signal Shaping and Reset Source Status - Clock Generator (CKGR) - Low-power 32 k Hz RC Oscillator, 32 k Hz On-chip Oscillator, 2 MHz Fast RC Oscillator and one PLL - Supply Controller (SUPC) - Minimizes Device Power...