Datasheet4U Logo Datasheet4U.com

ATA6026 - H-bridge Motor Driver

Description

The ATA6026 is used to drive a continuous-current motor in a full H-bridge configuration.

Features

  • PWM and Direction-controlled Driving of Four Externally Powered NMOS Transistors.
  • Internal Charge Pump Provides Gate Voltages for High-side Drivers in Permanent ON Mode and Supplies the Gate of the External Battery Reverse Protection NMOS.
  • 5V Regulator With External Power Device (NPN) and Current Limitation Function.
  • Reset Derived From 5V Regulator Output Voltage.
  • Sleep Mode With Supply Current of Typical 35 µA, Wake-up by Signal on Pin EN or on.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ATA644S28 Asymmetric thyristors PST
ATA6560 High-Speed CAN Transceiver Microchip
ATA6561 High-Speed CAN Transceiver Microchip
ATA6562 High-Speed CAN Transceiver Microchip
ATA6563 High-Speed CAN Transceiver Microchip

Other Datasheets by Atmel (Microchip)

Part Number Description
ATA6020N Low-current Microcontroller
ATA6025 WATCHDOG IC
ATA6140 TWO RELAY FLASHER
ATA6264 Airbag Power Supply IC
ATA6285 TPMS Control and Transmitter IC

Full PDF Text Transcription

Click to expand full text
Features • PWM and Direction-controlled Driving of Four Externally Powered NMOS Transistors • Internal Charge Pump Provides Gate Voltages for High-side Drivers in Permanent ON Mode and Supplies the Gate of the External Battery Reverse Protection NMOS • 5V Regulator With External Power Device (NPN) and Current Limitation Function • Reset Derived From 5V Regulator Output Voltage • Sleep Mode With Supply Current of Typical 35 µA, Wake-up by Signal on Pin EN or on • • • • • • SCI Interface (Pin /DATA) Window Watchdog; the Watchdog Time is Programmable by Choosing a Certain Value of the External Watchdog Capacitor CCWD and the External Watchdog Resistor RCWD Battery Overvoltage Protection and Battery Undervoltage Management Overtemperature Protection SCI Transceiver (Operating in Differential
Published: |