ATMEGA163L
Overview
- High-performance, Low-power AVR® 8-bit Microcontroller - 130 Powerful Instructions - Most Single Clock Cycle Execution - 32 x 8 General Purpose Working Registers - Fully Static Operation - Up to 8 MIPS Throughput at 8 MHz - On-chip 2-cycle Multiplier Nonvolatile Program and Data Memories Self-programming In-System Programmable Flash Memory - 16K Bytes with Optional Boot Block (256 - 2K Bytes) Endurance: 1,000 Write/Erase Cycles - Boot Section Allows Reprogramming of Program Code without External Programmer - Optional Boot Code Section with Independent Lock Bits - 512 Bytes EEPROM Endurance: 100,000 Write/Erase Cycles - 1024 Bytes Internal SRAM - Programming Lock for Software Security Peripheral Features - Two 8-bit Timer/Counters with Separate Prescaler and Compare Mode - One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode - Real Time Clock with Separate Oscillator and Counter Mode - Three PWM Channels - 8-channel, 10-bit ADC - Byte-oriented Two-wire Serial Interface - Programmable Serial UART - Master/Slave SPI Serial Interface - Programmable Watchdog Timer with Separate On-chip Oscillator - Analog Comparator Special Microcontroller Features - Power-on Reset and Programmable Brown-out Detection - Internal Calibrated RC Oscillator - External and Internal Interrupt Sources - Four Sleep Modes: Idle, ADC Noise Reduction, Power-save, and Power-down Power Consumption at 4 MHz, 3.0V, 25°C - Active 5.0 mA - Idle Mode 1.9 mA - Power-down Mode < 1 µA I/O and Packages - 32 Programmable I/O Lines - 40-pin PDIP and 44-pin TQFP Operating Voltages - 2.7 - 5.5V for ATmega163L - 4.0 - 5.5V for ATmega163 Speed Grades - 0 - 4 MHz for ATmega163L - 0 - 8 MHz for ATmega163 * *
- 8-bit Microcontroller with 16K Bytes In-System Programmable Flash ATmega163 ATmega163L *
- Not Recommend for New Designs. Use ATmega16. * *
- Rev. 1142E-AVR-02/03 1 Pin
