Datasheet4U Logo Datasheet4U.com

T7024 - ISM 2.4-GHz Front- End IC

General Description

The T7024 is a monolithic SiGe transmit/receive front-end IC with power amplifier, low-noise amplifier and T/R switch driver.

It is especially designed for operation in TDMA systems like Bluetooth™ and WDCT.

Key Features

  • Single 3-V Supply Voltage High Power-added Efficient Power Amplifier (Pout Typically 23 dBm) Ramp-controlled Output Power Low-noise Preamplifier (NF Typically 2.1 dB) Biasing for External PIN Diode T/R Switch Current-saving Standby Mode Few External Components Packages:.
  • PSSO20.
  • QFN20 with Extended Performance Bluetooth™/ISM 2.4-GHz FrontEnd IC T7024 Electrostatic sensitive device. Observe precaut.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
T700N Phase Control Thyristor Infineon
T700N SILICON CONTROLLED RECTIFIER Telefunken Microelectronics
T706DB01-V0 TFT LCD Module AUO
T709N SILICON CONTROLLED RECTIFIER Telefunken Microelectronics
T70HF Power Rectifier Diodes Vishay

Other Datasheets by Atmel (now Microchip Technology)

Part Number Description
T7023 Bluetooth 2.4-GHz Power Amplifier
T7026 ISM 2.4 GHz Front End IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Features • • • • • • • • Single 3-V Supply Voltage High Power-added Efficient Power Amplifier (Pout Typically 23 dBm) Ramp-controlled Output Power Low-noise Preamplifier (NF Typically 2.1 dB) Biasing for External PIN Diode T/R Switch Current-saving Standby Mode Few External Components Packages: – PSSO20 – QFN20 with Extended Performance Bluetooth™/ISM 2.4-GHz FrontEnd IC T7024 Electrostatic sensitive device. Observe precautions for handling. Description The T7024 is a monolithic SiGe transmit/receive front-end IC with power amplifier, low-noise amplifier and T/R switch driver. It is especially designed for operation in TDMA systems like Bluetooth™ and WDCT. Due to the ramp-control feature and a very low quiescent current, an external switch transistor for VS is not required. Figure 1.