ATmega169A
ATmega169A is 8-bit Atmel Microcontroller manufactured by Atmel.
Features
- High performance, low power Atmel® AVR® 8-Bit Microcontroller
- Advanced RISC architecture
- 130 powerful instructions
- most single clock cycle execution
- 32 × 8 general purpose working registers
- Fully static operation
- Up to 16MIPS throughput at16MHz (Atmel ATmega169A/169PA/649A/649P)
- Up to 20 MIPS throughput at 20MHz (Atmel ATmega329A/329PA/3290A/3290PA/6490A/6490P)
- On-chip 2-cycle multiplier
- High endurance non-volatile memory segments
- In-system self-programmable flash program memory
- 16Kbytes (Atmel ATmega169A/ATmega169PA)
- 32Kbytes (Atmel ATmega329A/ATmega329PA/ATmega3290A/ATmega3290PA)
- 64Kbytes (Atmel ATmega649A/ATmega649P/ATmega6490A/ATmega6490P)
- EEPROM
- 512bytes (ATmega169A/ATmega169PA)
- 1Kbytes (ATmega329A/ATmega329PA/ATmega3290A/ATmega3290PA)
- 2Kbytes (ATmega649A/ATmega649P/ATmega6490A/ATmega6490P)
- Internal SRAM
- 1Kbytes (ATmega169A/ATmega169PA)
- 2Kbytes (ATmega329A/ATmega329PA/ATmega3290A/ATmega3290PA)
- 4Kbytes (ATmega649A/ATmega649P/ATmega6490A/ATmega6490P)
- Write/erase cyles: 10,000 flash/100,000 EEPROM
- Data retention: 20 years at 85°C/100 years at 25°C (1)
- Optional Boot Code Section with Independent Lock Bits
- In-System Programming by On-chip Boot Program
- True read-while-write operation
- Programming lock for software security
- Atmel QTouch® library support
- Capacitive touch buttons, sliders and wheels
- Atmel QTouch and QMatrix acquisition
- Up to 64 sense channels
- JTAG (IEEE std. 1149.1 pliant) Interface
- Boundary-scan capabilities according to the JTAG standard
- Extensive on-chip debug support
- Programming of Flash, EEPROM, Fuses, and Lock Bits through the JTAG Interface
- Peripheral features
- 4 × 25 segment LCD driver (ATmega169A/ATmega169PA/ATmega329A/ATmega329PA/ATmega649A/ATmega649P)
- 4 × 40 segment LCD driver (ATmega3290A/ATmega3290PA/ATmega6490A/ATmega6490P)...
