Datasheet4U Logo Datasheet4U.com

SAM9G15 - AT91SAM ARM-based Embbedded MPU

General Description

The SAM9G15, based on the ARM926EJ-S™ processor, runs at 400 MHz and integrates a rich set of peripherals to support embedded industrial applications that require advanced user interfaces and high-speed communication.

Key Features

  • a graphics LCD controller with 4-layer overlay and 2D acceleration (picture-in-picture, alpha-blending, scaling, rotation, color conversion), and a 10-bit ADC that supports 4/5-wire resistive touchscreen panels. Multiple communication interfaces include a soft modem supporting exclusively the Conexant SmartDAA line driver, HS USB Host and Device and FS USB Host with dedicated onchip transceivers, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S and TWIs. The 10-layer bus matrix coupled with.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SAM9G20 32-BIT MICROPROCESSORS Microchip
SAM90F (SAM50F - SAM90F) HIGH VOLTAGE RECTIFIER SSDI
SAM90UF (SAM50F - SAM90F) HIGH VOLTAGE RECTIFIER SSDI
SAM9X60 SIP MPU Microchip
SAM-M8Q Easy-to-use u-blox M8 GNSS antenna u-blox

Other Datasheets by Atmel (now Microchip Technology)

Part Number Description
SAM9G15-EK User Guide
SAM9G10 ARM-based Embedded MPU
SAM9G20 SMART ARM-based Embedded MPU
SAM9G25 SMART ARM-based Embedded MPU
SAM9G25-EK User Guide

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AT91SAM ARM-based Embbedded MPU SAM9G15 DATASHEET Description The SAM9G15, based on the ARM926EJ-S™ processor, runs at 400 MHz and integrates a rich set of peripherals to support embedded industrial applications that require advanced user interfaces and high-speed communication. The SAM9G15 features a graphics LCD controller with 4-layer overlay and 2D acceleration (picture-in-picture, alpha-blending, scaling, rotation, color conversion), and a 10-bit ADC that supports 4/5-wire resistive touchscreen panels. Multiple communication interfaces include a soft modem supporting exclusively the Conexant SmartDAA line driver, HS USB Host and Device and FS USB Host with dedicated onchip transceivers, two HS SDCard/SDIO/MMC interfaces, USARTs, SPIs, I2S and TWIs.