Datasheet4U Logo Datasheet4U.com

S6510P - SIMPLE BALLAST CONTROLLER

Description

The device provides simple and performance electronics ballast control function for the half bridge L/C resonant inverter.

This device is optimized for electronics ballast requiring a minimum board area, reduced component count and low power dissipation.

Features

  • No lamp protection Low Start up & Operating Current Internal Soft Start Flexible Soft Start Frequency Trimmed 1.5% internal Reference Under Voltage Lock Out with Hysteresis High Current Totem Pole Gate Drive Ordering Information Type NO. S6510P Marking S6510P Package Code DIP-8 Outline Dimensions unit : mm PIN Collection KSI-L014-000 1 Internal Block Diagram 2V Vref ics S6510P Under Voltage Lock Out Vcc Current Multip.

📥 Download Datasheet

Datasheet preview – S6510P

Datasheet Details

Part number S6510P
Manufacturer AUK corp
File Size 340.89 KB
Description SIMPLE BALLAST CONTROLLER
Datasheet download datasheet S6510P Datasheet
Additional preview pages of the S6510P datasheet.

📁 Similar Datasheet

  • S6510MG - Infrared Laser Diode (Roithner)
  • S6515 - POSITION SENSITIVE DETECTOR (ETC)
  • S6503 - Power Factor Collector (KODENSHI)
  • S6503P - Power Factor Collector (KODENSHI)
  • S6505MG - Infrared Laser Diode (Roithner)
  • S650DK3-KD2 - TFT LCD Module (INNOLUX)
  • S650HJ2-LS5 - LCD Module (INNOLUX)
  • S6530MG - Red Laser Diode (Roithner)
  • S6551 - ASYNCHRONOUS COMMUNICATION INTERFACE ADAPTER (ETC)
  • S6551A - ASYNCHRONOUS COMMUNICATION INTERFACE ADAPTER (ETC)
Other Datasheets by AUK corp
  • S6510 - SIMPLE BALLAST CONTROLLER
  • S6500 - POWER FACTOR CORRECTOR
  • S6500P - POWER FACTOR CORRECTION

Full PDF Text Transcription

Click to expand full text
F Semiconductor S6510P SIMPLE BALLAST CONTROLLER Description The device provides simple and performance electronics ballast control function for the half bridge L/C resonant inverter. This device is optimized for electronics ballast requiring a minimum board area, reduced component count and low power dissipation. Internal soft start circuitry eliminates the need for an external soft start PTC resistor. The initial soft start frequency and soft start time can be easily adjusted depending on the types of lamp. Prevent burning out of switches in no lamp condition. Internal 18V regulator clamps Vcc line of supply voltage for eliminating an external zener diode.
Published: |