SL2055 Datasheet | Kodenshi AUK Group

Description - The SL 2055 is bipolar IC for receiving preamplifier of infrared remote control system. It consists of a head amplifier, a limiter, a band pass filter, a signal waveform detector, and a waveform rectifier, etc. Features - Built-in filter enable to vary center frequency by an external resistance (fo=30KHz to 80KHz, 38KHz typ.) - Possible to direct connection to a photo diode. - Open collector output(directly connectable to TTL and CMOS) - Internal pull-up resistance and power filter resistance(low-capacitance) - Less chances of malfunction associated with a high frequency lighting floure internal trap circuit Ordering Information Type NO. SL2055 Marking SL2055 Package Code SOP-8 Outline Dimensions unit : mm KSI-W025-001 Maximum Ratings (Ta = 25°C) Characteristics Supply Voltage Input Voltage Operating Temperature Storage Temperature Allowable Power Dissipation Symbol Vcc VIN Tope Tstg Pd Rating 17 5 -20 ~ 75 -55 ~ 150 270 Unit V Vp-p °C °C m W Block Diagram 4 fo V CC2 3 RS 1 V CC1 RL IN+ 8 HEA D A MP LI MI T ER BP F + TRAP DET ECT O R W A V EF O R M S HA P ER O UT 2 A BLC I N7 5 G ND 6 Cd PIN Description Pin. No 1 2 3 4 5 6 7 8 Symbol Pin Voltage Vcc1 Out Vcc2 fo GND Cd ININ+ 1.4 1.5 2.5 2.5 5.0 5.0 The Power Supply Voltage Description Active Low Output Terminal and an Open Collector Output The Power Output Voltage Setting the Center Frequency of the Built-in BPF Ground The Detection Capacitor for the most Output Pulse Width Variation and Noise Reduction Setting the Frequency Characteristics and Gain of the Head Amplifier The input Signal Internal Impedance : 75KΩ (typ.) KSI-W025-001 Electrical Characteristics(VCC=5V, Ta=25 °C) Item Input Pin Vol1 Input Pin Vol2 Output Voltage (Low...