AMMC-6430 Datasheet | AVAGO TECHNOLOGIES

Description The AMMC-6430 MMIC is a broadband nearly 1W power amplifier designed for use in transmitters that operate in various frequency bands between 25GHz and 33GHz. This MMIC optimized for linear operation with an output third order intercept point (OIP3) of 37d Bm. At 30GHz it provides 29d Bm of output power (P-1d B) and 17d B of gain. The device has input and output matching circuitry for use in 50 Ω environments. The AMMC-6430 also integrates a temperature pensated RF power detection circuit that enables power detection of 0.3V/W. DC bias is simple and the device operates on widely available 5.5V for current supply (negative voltage only needed for Vg). It is fabricated in a PHEMT process for exceptional power and gain performance. For improved reliability and moisture protection, the die is passivated at the active areas. Features - Wide frequency range: 25 - 33 GHz - High gain: 17 d B - Power: @30 GHz, P-1d B=29 d Bm - Highly linear: OIP3=37d Bm - Integrated RF power detector - 5.5 Volt, -0.7 Volt, 900m A operation Applications - Microwave Radio systems - Satellite VSAT and DBS systems - LMDS & Pt-Pt mm W Long Haul - 802.16 & 802.20 Wi Max BWA - WLL and MMDS loops - mercial grade military - Can be driven by AMMC-6345, increasingluding overall gain. .. AMMC-6430 Absolute Maximum Ratings[1] Symbol Vd Vg Id Pin Tch Tstg Parameters/Conditions Positive Drain Voltage Gate Supply Voltage Drain Current CW Input Power Operating Channel Temp. Storage Case Temp. Units V V m A d Bm °C °C -65 -3 Min. Max. 7 0.5 1500 23 +150 +150 +300 Tmax Maximum Assembly Temp (60 sec max) °C Note: 1. Operation in excess of any one of these conditions may result in permanent damage to this device. Note: These devices are ESD sensitive. The following precautions are strongly remended. Ensure that an ESD approved carrier is used when dice are transported from one destination to another. Personal grounding is to be worn at all times when handling these devices AMMC-6430 DC...