Datasheet4U Logo Datasheet4U.com

ALM-1106 - Amplifier

General Description

Avago Technologies’s ALM-1106 is a LNA designed for GPS/ISM/Wimax applications in the (0.9-3.5)GHz frequency range.

The LNA uses Agilent Technologies’s proprietary GaAs Enhancement-mode pHEMT process to achieve high gain operation with very low noise figures and high linearity.

Key Features

  • Advanced GaAs E-pHEMT.
  • Low Noise: 0.8 dB typ.
  • High Gain : 14.3 dB typ.
  • Low component count.
  • High IIP3 and IP1dB.
  • Wide Supply Voltage: 1V to 3.6V.
  • Shutdown current : < 0.1uA.
  • CMOS compatible shutdown pin (VSD) current @ 2.85V : 90uA.
  • Adjustable bias current via one single external resistor/voltage.
  • Small Footprint: 2x2mm2.
  • Low Profile: 1.1mm typ.
  • Ext matching for non-GPS freq band operatio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
ALM-1106 GPS Low Noise Amplifier Agilent Technologies
ALM-38140 50MHz - 4GHz PIN Diode Variable Attenuator AVAGO TECHNOLOGIES LIMITED
ALM1106 GPS Low Noise Amplifier Agilent Technologies
ALM1108 Programmable Mixed-Signal IC DIODES
ALM2402-Q1 Dual Op-amp Texas Instruments

Other Datasheets by Avago Technologies (now Broadcom)

Part Number Description
ALM-11036 Amplifier
ALM-11136 870 MHz - 915 MHz Low Noise High Linearity Amplifier
ALM-11236 Amplifier
ALM-11336 Amplifier
ALM-12124 High Power SPDT Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ALM-1106 GPS Low Noise amplifier with Variable bias current and Shutdown function Data Sheet Description Avago Technologies’s ALM-1106 is a LNA designed for GPS/ISM/Wimax applications in the (0.9-3.5)GHz frequency range. The LNA uses Agilent Technologies’s proprietary GaAs Enhancement-mode pHEMT process to achieve high gain operation with very low noise figures and high linearity. Noise figure distribution is very tightly controlled. Gain and supply current are guaranteed parameters. A CMOS compatible shutdown pin is included to turn the LNA off and provide a variable bias. The ALM-1106 LNA is useable down to 1V operation. It achieves low noise figures and high gain even at 1V, making it suitable for use in critical low power GPS/ISM band applications.